The Benro GoPlus FGP18A is unusual because it combines a compact reverse-folding travel design with an adjustable centre column that can move away from the vertical. That makes it more interesting for controlled close-up work than a conventional travel tripod.
Its main attraction is versatility, not absolute lightness. The aluminium legs, four-section layout and stated 10 kg capacity suit a normal mirrorless or DSLR kit, while the lateral column opens positions that are awkward with a fixed centre column.
What the design changes in practice
The column can be repositioned for overhead, side-on and low compositions. In macro photography this lets the camera reach over a subject without putting the tripod legs directly where you need to stand. It also changes the balance, so the camera should be kept close to the tripod apex whenever possible.
A removable leg and centre column can form a monopod. That is useful for events or walking routes, but it is not a substitute for a tripod in low light because a monopod removes only some movement. The 3/8-inch platform accepts a separate head, so check whether a listing includes one before buying.





Stability is more than the payload figure
The 10 kg stated capacity is generous for its class, but lateral-column work introduces leverage. A camera placed far out to the side can tip a tripod long before the published capacity is reached. Keep the legs wide, work low, and add counterweight only when it is secure.
The sealed twist locks are practical after dusty or damp locations, but they still need occasional cleaning. Extend the thicker sections before the thinnest ones, avoid using the centre column at full reach for long exposures, and make sure the column pivot is locked before letting go of the camera.
Where it makes sense
Choose this design if macro, product or copy work is as important as travel photography. It can also be a good one-trip solution for someone who needs a normal tripod, a low support and an occasional monopod without carrying separate pieces.
For a smaller kit that sacrifices the lateral column, see the Benro Rhino FRHN05CVX20. For practical technique once the camera is close to the ground, our macro photography guide is also relevant.
Limits to accept before buying
It is not the smallest or lightest travel tripod, and the mechanism is more complicated than a simple centre column. Anyone who only shoots landscapes at normal height may pay for flexibility they will rarely use.
Key specifications
- Aluminium, four-section legs
- Approx. 1.59 kg weight
- Approx. 46 cm folded length
- Approx. 154 cm maximum height
- 10 kg stated load capacity
- Adjustable lateral centre column and monopod conversion
Why the lateral column needs care
A lateral column is genuinely useful, but it is not a free upgrade in every situation. Moving the camera sideways changes the centre of gravity, so a tall setup can become less secure even with a light camera. For overhead work, keep the legs wide and avoid placing the camera directly above anything fragile until all locks have been checked.
The column is most valuable when it solves a real framing problem: photographing flowers from above, copying documents, shooting small products or reaching across a table. For ordinary landscapes, a conventional central position is quicker and often more stable.
Buying an older Benro kit
Availability varies because this is an older model. Confirm whether the listing includes legs only or a ball head, and inspect the column lock, leg locks and interchangeable feet on used examples. The price needs to reflect the fact that current travel tripods may be lighter or faster to deploy, even if they do not offer the same column movement.
Care after close-up work
Macro sessions often happen close to wet grass, soil or sand. Wipe the feet and column joints before packing the tripod away. A column that moves smoothly is important for this model, so dirt should not be pushed into its locking surfaces.
Before committing to any tripod, mount the heaviest camera-and-lens combination you actually carry. A tripod that looks ideal in a specification table can feel very different once the framing angle, wind and position of the centre column are involved. The right choice is the one that gives you a repeatable, safe setup rather than the highest number on its box.
30-second decision
Buy it for the movable column and the freedom it gives macro or product work. Skip it if your priority is the smallest possible bag or the fastest simple setup.
For more help choosing the right support, see our guide to travel tripods and these practical reasons a camera tripod matters.
For the manufacturer or a reliable technical reference, see Benro’s GoPlus system overview.
As an Amazon Associate, GottaPics earns from qualifying purchases.
Check current availability on Amazon.


